dataphleet Book a demo

Glossary

NERC compliance terms, defined plainly.

The acronyms behind PRC, FAC and CIP compliance, especially the new IBR standards, in one place. Where a term comes from a specific requirement, we say which.

BES — Bulk Electric System
The transmission elements and generating resources (generally 100 kV and above, with defined inclusions and exclusions) that NERC Reliability Standards protect.
BCSI — BES Cyber System Information
Information about a BES Cyber System that could be used to gain unauthorized access or pose a security threat. Protected under CIP-011; provisioned access managed under CIP-004-7 R6.
BES Cyber System
One or more BES Cyber Assets grouped to perform a reliability function. Categorized as high, medium or low impact under CIP-002.
CAP — Corrective Action Plan
A documented list of actions and a timetable to fix an identified problem, such as an IBR performance issue under PRC-030-1 R3 or a recording failure under PRC-028-1 R8.
Category 2 IBR
A non-BES inverter-based resource with ≥ 20 MVA aggregate nameplate connected at ≥ 60 kV, whose owners and operators NERC registered as GOs and GOPs effective May 15, 2026. See our IBR guide.
CEA — Compliance Enforcement Authority
NERC or the Regional Entity (or another designated body) that monitors and enforces compliance.
CIP Senior Manager
The single named senior manager accountable for an entity's CIP program, required by CIP-003 R3.
CMEP — Compliance Monitoring and Enforcement Program
NERC's process for audits, spot checks, self-reports and enforcement of Reliability Standards.
COMTRADE — IEEE C37.111
The Common Format for Transient Data Exchange: a .cfg header and .dat data file pair used by relays and recorders. One of the formats PRC-028-1 accepts for fault recording data.
DDR — Dynamic disturbance recording
Continuous, lower-rate recording of system quantities for minutes to hours. PRC-028-1 requires ≥ 960 samples/s input and ≥ 60 records/s output at each main power transformer.
Deterministic validation
Compliance logic written as explicit rules, so identical inputs always produce identical results with the calculation shown. The opposite of a probabilistic model's answer.
DFR — Digital fault recorder
A device that captures high-resolution waveforms around a trigger. Its records are a common input to PRC-028 and PRC-030 work.
DME — Disturbance monitoring equipment
Devices that record SER, fault and dynamic disturbance data.
Facility Rating
The maximum or minimum voltage, current, frequency or power flow a Facility can carry, set by its most limiting series equipment. Governed by FAC-008.
FR — Fault recording
Triggered, high-resolution recording of voltages and currents. PRC-028-1 requires ≥ 2 cycles of pre-trigger and ≥ 2.0 s total length.
GO / GOP — Generator Owner / Generator Operator
NERC functional registrations for entities that own or operate generating facilities.
GSU / MPT — Generator step-up / main power transformer
The transformer connecting a plant to the transmission system. PRC-024 and PRC-029 measure voltage at its high side.
IBR — Inverter-based resource
A generating or storage resource connected through power electronics: solar PV, Type 3 and 4 wind, battery storage.
Momentary cessation
An inverter stopping current injection during a voltage disturbance without disconnecting. Prohibited in the PRC-029-1 must-ride-through zone.
Most limiting element
The series equipment with the lowest rating in a Facility, which sets the Facility Rating. FAC-008 R8 requires identifying it on request.
No-trip zone
The voltage–time or frequency–time region in PRC-024 Attachments 1 and 2 where protection must not trip a unit. It ends at 4 seconds for voltage.
PSMP — Protection System Maintenance Program
The program PRC-005 R1 requires, defining maintenance methods, activities and intervals for each component type.
Regional Entity
One of the six organizations (MRO, NPCC, RF, SERC, Texas RE, WECC) that audit and enforce NERC standards under delegation.
Ride-through
Staying connected and continuing to support the grid during a voltage or frequency excursion. Required of IBRs by PRC-029-1.
RoCoF — Rate of change of frequency
How fast system frequency is moving, in Hz/s. PRC-029-1 requires ride-through when |RoCoF| ≤ 5 Hz/s.
RSAW — Reliability Standard Audit Worksheet
The worksheet auditors use to assess compliance with a standard, which entities often pre-populate with their evidence.
SER — Sequence of events recording
Time-stamped records of breaker and status changes. Required for IBRs by PRC-028-1 R1 and delivered as CSV.
Unresolved Maintenance Issue
A deficiency found during PRC-005 maintenance that can't be fixed during that activity. R5 requires demonstrated efforts to correct it.
VSL / VRF — Violation Severity Level / Violation Risk Factor
How badly a requirement was missed, and how much risk the requirement addresses. Together they drive penalty ranges.

Definitions are our summaries. The NERC Glossary of Terms Used in Reliability Standards is authoritative.